Taken with a PalmPix camera...

[alexpgp]

This photo was taken in low ambient light, with no flash, using a Kodak PalmPix camera, which hooks onto the sync port of a Palm III and uses the Palm's software and storage to turn the combo into a cheap digital camera.

I've resampled the image from 640 x 480 to 320 x 240 and saved it as a 70 dpi JPG with 25% compression.

The specifications on the unit are as follows: The lens on the unit is f/2.0, with a focal length of 6.1 mm and a focusing distance of from 36 inches to infinity. The shutter speed varies from 1/15 to 1/500 of a second.

The quality of the photo is not stellar, but neither is the price of the unit ($99 at the local Franklin Covey store). Futhermore, I suspect it would take better pictures given more light to play with.

The subject, BTW, is yours truly, at his position in the MCC, during a break in the action.

Cheers...

Comments

Re: ...

[bryn.livejournal.com]

Hmmm... looks like Russian to me. I guess this computer supports it. How'd you do that?

Re: ...

[alexpgp.livejournal.com]

Assuming you have a Windows machine:

Click on "Start"; then on "Settings"; then on "Control Panel."

Open the "Add/Remove Programs" icon.

Click on the tab at the top that says "Windows Setup."

Scroll down the list to "Multilanguage Support."

Click the check box to install it. Click on OK.

(At this point, depending on how your box is set up, you may need to insert the Windows CD so the appropriate files can be copied over.)

Once multilanguage support is installed, repeat the procedure for getting to the Control Panel, then open the "Keyboard" icon. Click on the "Language" tab at the top. Click on "Add"; select Russian. Close the Keyboard dialog by clicking on "OK." Again, you may have to insert the operating system CD.

Reboot your machine. When it comes back up, you should see a small blue box in your system tray (lower right hand corner, next to the time). It should read 'En' (for 'English', natch).

Press the left Alt key and then the Shift key; the 'En' in the box ought to change to 'Ru'. Now try typing.

You should see Cyrillic.

Hope this helps.

Cheers...