alexpgp: (Default)
[personal profile] alexpgp
The cord to raise or lower the window blind in my office assumes an angle of about 25 degrees with respect to the wall when I manipulate the blind. Yesterday, I found out the hard way that the "perpendicular-to-the-wall" component of the force (the part that does nothing to actually raise the blind) is sufficient to pull the fastener doodads holding the end of the blind completely out of the wall, causing the blind to fall with the kind of impact and clatter one associates with serious force.

Clatter I can deal with; it's just noise. The stuff underneath the blind when it fell doesn't generally do so well with impact, but nothing seems to be broken. But with no blind in place, the late afternoon sun shines directly into my window, so the room became pretty hot.

Galina came up with the idea of using a piece of radiant barrier that (apparently) has been abandoned by the crew that started, but never finished the job of installing it in our attic. The barrier works very well, from the temperature perspective, but it's opaque, which means the light has to stay on whenever I'm working in the office. In and of itself, since I'm using energy-efficient bulbs, the heat load from the lights is not bad, but I am coming to realize just how much I dislike working in what amounts to a windowless room.

Ah, well, live and learn...

Date: 2014-07-07 12:39 am (UTC)
From: [identity profile] velvet-granat.livejournal.com
My home office faces west, and in summer it get the full blast of afternoon sun from about 1 pm until sunset. The neighbour next door has a galvanised iron roof on his garage, bless him, so I get very nice reflection of sunlight off that AS WELL. During first summer we spent in this apartment, the office was unusable after lunchtime - up to 110 -125 F!

We put a timber Venetian blind on that window, nice dark cedar, which helped, but it was still too hot. Then had a bright idea and bought some adhesive silver thin ducting tape (about $5 a roll from hardware store). The slats are 48 mm wide, tape is 50 mm, close enough. Two hours work turned one side of the blind into something resembling a space-age slatted mirror.

Tested the rig last summer - temps dropped literally down to 85 F. It's SO good. :) Looks nice from the inside, too, as I only stuck the silver stuff on the intended external surface, so the inside is still soothing dark cedar.
Edited Date: 2014-07-07 12:40 am (UTC)

Date: 2014-07-07 01:49 pm (UTC)
From: [identity profile] alexpgp.livejournal.com
Good application for duct tape!

I had a momentary idea of doing the same thing with the materials I have at hand, but I figure by the time I get to this "to do" item, it'll be fall! :^)

Date: 2014-07-07 11:43 pm (UTC)
From: [identity profile] velvet-granat.livejournal.com
It only took me two hours :)

Besides, in the fall you can flip the slats the other way and reflect the warmth back inside the room!

Profile

alexpgp: (Default)
alexpgp

January 2018

S M T W T F S
  1 2 3456
7 8910111213
14 15 16 17181920
21222324252627
28293031   

Most Popular Tags

Style Credit

Expand Cut Tags

No cut tags
Page generated Sep. 11th, 2025 06:00 am
Powered by Dreamwidth Studios